802.11ac Carrier Settings: Non-HT

General

Number of Transmit Chains (Ntx)

Set the number of transmit chains when Channel State is ON. When Channel State is Off, the number of transmit chains is automatically set equal to the number of connected instruments and can't be edited.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:NTX <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:NTX?
SCPI Example
Couplings
Preset	1
State Saved	Yes
Min
Max

Coding and Modulation

Data Rate

Select the data rate for the legacy WLAN.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:DRATe OFDM6\|OFDM9\|OFDM12\|OFDM18\|OFDM24\|OFDM36\|OFDM48\|OFDM54 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:DRATe?
SCPI Example
Couplings	Affects the Number of Data Symbols in One Frame and Total Sample Points.
Preset	OFDM36
State Saved	Yes

Modulation

Query only

Displays the modulation type.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:MODulation?
SCPI Example
Couplings
Preset	QAM16
State Saved	Yes

Coding Rate

Query only

Displays the coding rate of the BBC encoder.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:CRATe?
SCPI Example
Couplings
Preset	R34
State Saved	Yes

Scrambler

Enable or disable the scrambler. The scrambler scrambles the data to reduce the probability of long sequences of zeros and ones.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:SCRambler[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:SCRambler[:STATe]?
SCPI Example
Couplings	Scrambler is fixed to ON when Capability is set to Basic.
Preset	ON
State Saved	Yes

Scrambler Initialization

Set the initial state of the scrambler in decimal format. The decimal number is converted to 7 bits for input into the scrambler.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:SCRambler:INIT <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:SCRambler:INIT?
SCPI Example
Couplings
Preset	93
State Saved	Yes
Min
Max

Channel Coding State

Enable or disable the BCC encoder.

Channel Coding State is fixed to OFF when Capability is set to Basic.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:CCODing[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:CCODing[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

BCC Interleaver

Enable or disable the BCC interleaver. BCC Interleaver interleaves the bits of each spatial stream (changes order of bits) to prevent long sequences of adjacent noisy bits from entering the BCC decoder. Interleaving is applied only when BCC encoding is used.

BCC Interleaver is fixed to OFF when Capability is set to Basic.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BCC:INTerleaver ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BCC:INTerleaver?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Impairments

Set the quadrature skew impairment (-90 to +90 degrees) to the generated waveform for the specific signal generator. This affects the waveform data so it applies to both RF and baseband I/Q outputs.

The baseband Quadrature Angle (angle) and the baseband IQ Gain (gain) values are used to modify the output I and Q data according to the following equations:

Real (output) = Real (input) - Gs * Imag (input)

Imag (output) = Gc * Imag (input)

where:

Gs = Gain * sin (angle) and

Gc = Gain * cos (angle)

Set the quadrature gain impairment (-10 dB to 10 dB) to the generated waveform for the specific signal generator. This affects the waveform data so it applies to both the RF and baseband I/Q outputs.

Quadrature Angle Adjustment for Waveform 1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG1 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG1?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

I/Q Gain Balance for Waveform 1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB1 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB1?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Quadrature Angle Adjustment for Waveform 2

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG2 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG2?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

I/Q Gain Balance for Waveform 2

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB2 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB2?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Quadrature Angle Adjustment for Waveform 3

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG3 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG3?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

I/Q Gain Balance for Waveform 3

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB3 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB3?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Quadrature Angle Adjustment for Waveform 4

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG4 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG4?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

I/Q Gain Balance for Waveform 4

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB4 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB4?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Quadrature Angle Adjustment for Waveform 5

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG5 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG5?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

I/Q Gain Balance for Waveform 5

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB5 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB5?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Quadrature Angle Adjustment for Waveform 6

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG6 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG6?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

I/Q Gain Balance for Waveform 6

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB6 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB6?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Quadrature Angle Adjustment for Waveform 7

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG7 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG7?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

I/Q Gain Balance for Waveform 7

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB7 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB7?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Quadrature Angle Adjustment for Waveform 8

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG8 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:QUAD:ANG8?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

I/Q Gain Balance for Waveform 8

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB8 <real> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:IQ:GB8?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Payload

This tab is applicable/visible only when Frame Type is set to Data and Control.

MPDU Index

Applicable for Advanced Capability Only

Query only command.

The index for each MPDU. This cell cannot be edited.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:INDex?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

MPDU Length

Applicable for Advanced Capability Only

Displays the number of octets in the current MPDU, which is comprised of MSDU, MAC Header, and MAC FCS.

The maximum allowed MPDU length can be 11454 bytes.

MPDU Length becomes the same as Data Length when you disable MAC FCS and MAC Header.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:LENgth?
SCPI Example
Couplings
Preset	1058
State Saved	Yes
Min
Max

Data Type

Select the payload data source.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:TYPE ALL\|PN9\|PN15\|FILE [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:TYPE?
SCPI Example
Couplings
Preset	PN9
State Saved	Yes

PN9 Seed

This setting is applicable/visible only when Data Type is set to PN9.

Specify a seed, in decimal format, to generate a PN9 data sequence. The LSB of the seed comes out first. For example, if you enter a seed value of 10 (1010 in binary), the first 9 bits of the PN9 sequence are 0 1 0 1 0 0 0 0 0, with an increasing index from left to right. For more information, see PN Sequence Generation.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:PN9:SEED <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:PN9:SEED?
SCPI Example
Couplings
Preset	511
State Saved	Yes
Min
Max

PN15 Seed

This setting is applicable/visible only when Data Type is set to PN15.

Specify a seed in decimal format to generate a PN15 data sequence. The LSB of the seed comes out first. For example, if you enter a seed value of 10 (1010 in binary), the first 15 bits of the PN15 sequence are 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0, with an increasing index from left to right. For more information, see PN Sequence Generation.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:PN15:SEED <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:PN15:SEED?
SCPI Example
Couplings
Preset	32767
State Saved	Yes
Min
Max

User File

This setting is applicable/visible only when Data Type is set to User File.

Click the > button displayed with this setting to select a user file as the data source.

The user file must be in binary form. The least significant bit (LSB) of the first byte in the user data file will be the first bit of the user payload; the LSB of the second byte in the user file will be the ninth bit of the user payload, and so on. If User file is selected as the Data Type, the value displayed in the Data Length field will be equal to the length of the user's data file, up to the maximum data length.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:FILE [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:FILE?
SCPI Example
Couplings
Preset
State Saved	Yes

User File Length

Query only

This setting is applicable/visible only when Data Type is set to User File.

Displays the number of data bytes in the user file when it is selected as the payload data source.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:FILE:LENGth?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Data Length

Set the number of data bytes in a frame. The value is limited by MPDU Length (maximum MPDU Length allowed is 11454 bytes).

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:LENGth <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:DATA:LENGth?
SCPI Example
Couplings
Preset	1024
State Saved	Yes
Min
Max

MAC FCS

Applicable for Advanced Capability Only

Enable or disable appending the MAC FCS to the data payload. The FCS is automatically calculated by the software if this setting is enabled.

When the MAC header is not selected, then the FCS is applied to just the payload.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:FCS ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:FCS?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Increment Sequence Number

Applicable for Advanced Capability Only

Enable or disable incrementing the Sequence Number within the Sequence Control setting in the MAC Header. When it is turned ON, the Sequence Number increments by one after each user-specified interval of new frames. For an example of how incrementation works, see Incrementing Sequence and Fragment Numbers.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:INCRement:SEQuence[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:VHT:USERsetup<channel>:PAYLoad:INCRement:SEQuence[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Increment Fragment Number

Applicable for Advanced Capability Only

Enable or disable incrementing the Fragment Number within the Sequence Control setting in the MAC Header. When it is turned ON, the Fragment Number increments by one after every assignment of a new frame. This field uses the Sequence Number Increment by Frames value as the upper limit. When the upper limit is reached, incrementation wraps back to zero. For an example of how incrementation works, see Incrementing Sequence and Fragment Numbers.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:INCRement:FRAGment[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:VHT:USERsetup<channel>:PAYLoad:INCRement:FRAGment[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Sequence Number Increment by Frames

Applicable for Advanced Capability Only

The number of frames you set in this setting determines when the Sequence Number within the Sequence Control setting in the MAC Header is incremented. For an example of how incrementation works, see Incrementing Sequence and Fragment Numbers.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:INCRement:SEQuence:FRAMes <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:VHT:USERsetup<channel>:PAYLoad:INCRement:SEQuence:FRAMes?
SCPI Example
Couplings
Preset	1
State Saved	Yes
Min
Max

Mac Header

Click the > button displayed with this setting to open the MAC Header dialog, which enables or disables pre-pending the MAC header to the data payload. You can select General, RTS, CTS, or ACK MAC frame format by clicking the down-arrow in the top right corner of the Mac Header dialog. You can set the desired data in each of the individual fields for each format. You can also disable these fields if the data is no longer desired by clearing the checkbox for each of these.

Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Mac Header Type

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:TYPE GENeral\|RTS\|CTS\|ACK [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:TYPE?
SCPI Example
Couplings
Preset	GENeral
State Saved	Yes

Length

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:LENGth?
SCPI Example
Couplings
Preset	30
State Saved	Yes
Min
Max

Frame Control Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:FRAMe[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Frame Control Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:FRAMe:SIZE?
SCPI Example
Couplings
Preset	2
State Saved	Yes
Min
Max

Frame Control Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:FRAMe:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:FRAMe:CONTent?
SCPI Example
Couplings
Preset	2048
State Saved	Yes
Min
Max

Duration Id Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:DURation[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Duration Id Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:DURation:SIZE?
SCPI Example
Couplings
Preset	2
State Saved	Yes
Min
Max

Duration Id Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:DURation:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:DURation:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Address 1 Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A1[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Address 1 Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A1:SIZE?
SCPI Example
Couplings
Preset	6
State Saved	Yes
Min
Max

Address 1 Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A1:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A1:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Address 2 Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A2[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A2[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Address 2 Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A2:SIZE?
SCPI Example
Couplings
Preset	6
State Saved	Yes
Min
Max

Address 2 Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A2:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A2:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Address 3 Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A3[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A3[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Address 3 Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A3:SIZE?
SCPI Example
Couplings
Preset	6
State Saved	Yes
Min
Max

Address 3 Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A3:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A3:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Address 4 Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A4[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A4[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Address 4 Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A4:SIZE?
SCPI Example
Couplings
Preset	6
State Saved	Yes
Min
Max

Address 4 Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A4:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:ADDRess:A4:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Seq Control Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:SEQ[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:SEQ[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Seq Control Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:SEQ:SIZE?
SCPI Example
Couplings
Preset	2
State Saved	Yes
Min
Max

Seq Control Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:SEQ:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:SEQ:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Qos Control Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:QOS[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:QOS[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Qos Control Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:QOS:SIZE?
SCPI Example
Couplings
Preset	2
State Saved	Yes
Min
Max

Qos Control Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:QOS:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:QOS:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Ht Control Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:HT[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:HT[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Ht Control Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:HT:SIZE?
SCPI Example
Couplings
Preset	4
State Saved	Yes
Min
Max

Ht Control Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:HT:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:PAYLoad:MAC:HEADer:HT:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Beacon Frame

Applicable for Advanced Capability Only

This tab is applicable/visible when Frame Type is set to Beacon.

General

Beacon Frame Length (bytes)

Indicates the total number of bytes contained in the Beacon frame, which includes the MAC header, frame body and FCS.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:FRAMe:LENGth <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:FRAMe:LENGth?
SCPI Example
Couplings
Preset	68
State Saved	Yes
Min
Max

Hex Byte Order

Specify the byte order of a hexadecimal value entered into a GUI parameter field.

Little Endian - the leftmost byte (two digits) of the hexadecimal string is least significant and is transmitted first in the beacon frame.
Big Endian - the leftmost byte (two digits) of the hexadecimal string is most significant and is transmitted last in a the beacon frame.

For example, if you want to enter a numeric value of 3215267533596, you must first convert it to its hexadecimal form of 0x2EC9CE1131C. Then, in case of Little Endian, it should be entered into the GUI field as 1C13E19CEC2, while in the case of Big Endian, it should be entered as 2EC9CE1131C.

Hex byte order has no effect on the parameters that don't require hexadecimal input. Few parameters using a simple numerical value may still require hexadecimal input.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HEX:ORDer LITTle\|BIG [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HEX:ORDer?
SCPI Example
Couplings
Preset	LITTle
State Saved	Yes

Mac Header

Click the > button displayed with this setting to open the MAC Header dialog. You can set the desired data in each of the individual fields. You can also disable these fields if the data is no longer desired by clearing the checkbox and value for each of these.

Length

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:LENGth?
SCPI Example
Couplings
Preset	30
State Saved	Yes
Min
Max

Frame Control Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:FRAMe[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Frame Control Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:FRAMe:SIZE?
SCPI Example
Couplings
Preset	2
State Saved	Yes
Min
Max

Frame Control Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:FRAMe:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:FRAMe:CONTent?
SCPI Example
Couplings
Preset	32896
State Saved	Yes
Min
Max

Duration Id Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:DURation[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Duration Id Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:DURation:SIZE?
SCPI Example
Couplings
Preset	2
State Saved	Yes
Min
Max

Duration Id Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:DURation:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:DURation:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Address 1 Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A1[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Address 1 Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A1:SIZE?
SCPI Example
Couplings
Preset	6
State Saved	Yes
Min
Max

Address 1 Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A1:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A1:CONTent?
SCPI Example
Couplings
Preset	281474976710655
State Saved	Yes
Min	-
Max

Address 2 Enable

Indicates the Enable status of SA field in GUI.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A2[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Address 2 Size

Indicates the Number of Bytes of SA field in GUI.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A2:SIZE?
SCPI Example
Couplings
Preset	6
State Saved	Yes
Min
Max

Address 2 Contents

Specifies the value of SA field in GUI.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A2:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A2:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min	-
Max

Address 3 Enable

Specifies the Enable state of BSSID field in GUI.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A3[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Address 3 Size

Specifies the Number of Bytes of BSSID field in GUI.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A3:SIZE?
SCPI Example
Couplings
Preset	6
State Saved	Yes
Min
Max

Address 3 Contents

Specifies the value of BSSID field in GUI.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A3:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:ADDRess:A3:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min	-
Max

Seq Control Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:SEQ[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Seq Control Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:SEQ:SIZE?
SCPI Example
Couplings
Preset	2
State Saved	Yes
Min
Max

Seq Control Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:SEQ:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:SEQ:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Ht Control Enable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:HT[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:HT[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Ht Control Size

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:HT:SIZE?
SCPI Example
Couplings
Preset	4
State Saved	Yes
Min
Max

Ht Control Contents

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:HT:CONTent <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:MAC:HEADer:HT:CONTent?
SCPI Example
Couplings
Preset	0
State Saved	Yes
Min
Max

Frame Body

Time Stamp

Represents the value of the timing synchronization function (TSF) timer of a frame’s source. The length of the time stamp field is 8 octets.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:TIME:STAMp [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:TIME:STAMp?
SCPI Example
Couplings
Preset	"0000000000000000"
State Saved	Yes

Beacon Interval (TU)

Represents the number of time units (TUs) between target beacon transmission times (TBTTs). One time unit (TU) equals 1024 µs. The length of the Beacon Interval field is 2 octets.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:INTerval <integer> [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:INTerval?
SCPI Example
Couplings
Preset	100
State Saved	Yes
Min
Max

Capability

Click the > button displayed with the Capability setting to open the Capability dialog that contains a number of subfields that are used to indicate requested or advertised optional capabilities. The length of the Capability field is 2 octets.

Length

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:LENGth?
SCPI Example
Couplings
Preset	2
State Saved	Yes
Min
Max

ESS(B0)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:ESS[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:ESS[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

IBSS(B1)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:IBSS[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:IBSS[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

CF Pollable(B2)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:CFPOllable[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:CFPOllable[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

CF-Poll Request(B3)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:CFPRequest[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:CFPRequest[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Privacy(B4)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:PRIVacy[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:PRIVacy[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Short Preamble(B5)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:SPReamble[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:SPReamble[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

PBCC(B6)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:PBCC[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:PBCC[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Channel Agility(B7)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:CAGility[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:CAGility[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Spectrum Management(B8)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:SPECtrum[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:SPECtrum[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

QOS(B9)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:QOS[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:QOS[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Short Slot Time(B10)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:SSTime[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:SSTime[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

APSD(B11)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:APSD[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:APSD[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Radio Measurement(B12)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:RADio:MEAsurement[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:RADio:MEAsurement[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

DSSS OFDM(B13)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:DSSS:OFDM[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:DSSS:OFDM[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Delayed Block Ack(B14)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:DBACk[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:DBACk[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Immediate Block Ack(B15)

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:IBACk[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:CAPability:IBACk[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Service Set Identifier (SSID)

The SSID element specifies the identity of an ESS or IBSS. The number of characters of the identity is between 0 and 32. If you enter characters more than 32, it will be truncated to a length of 32.
SSID's element ID is 0, and its length is 2 to 34 octets.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:SSID [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:SSID?
SCPI Example
Couplings
Preset	"N7617C"
State Saved	Yes

Supported Rate

The Supported Rate setting specifies up to eight rates in the OperationalRateSet parameter, as described in the MLME-JOIN.request and MLME-START.request primitives, and zero or more BSS membership selectors. The Information field is encoded as 1 to 8 octets, where each octet describes a single Supported Rate or BSS membership selector. Supported Rate's element ID is 1, and its length is 3 to 10 octets.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:SUPPorted:RATe [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:SUPPorted:RATe?
SCPI Example
Couplings
Preset	"0000000000000000"
State Saved	Yes

DSSS (Current Channel)

The DSSS Parameter Set element contains information to allow channel number identification for STAs. Its element ID is 3, and its length is 3 octets.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:DSSS [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:DSSS?
SCPI Example
Couplings
Preset	"00"
State Saved	Yes

IBSS (ATIM Window)

The IBSS Parameter Set element contains the set of parameters necessary to support an IBSS. The Information field contains the ATIM Window parameter. Its element ID is 6, and its length is 4 octets.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:IBSS [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:IBSS?
SCPI Example
Couplings
Preset	"0000"
State Saved	Yes

ERP

Click the > button displayed with the ERP setting to open the ERP dialog box where you can configure the ERP parameters. The ERP element contains information on the presence of Clause 16 or Clause 17 STAs in the BSS that are not capable of Clause 19 (ERP-OFDM) data rates. It also contains the requirement of the ERP element sender (AP in an infrastructure BSS, STA in an IBSS, or mesh STA in an MBSS) as to the use of protection mechanisms to optimize BSS performance and as to the use of long or short Barker preambles.

Its element ID is 42, and its length is 3 octets.

Enabled

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:ENABled[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:ENABled[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

Element ID

Query only

This SCPI value is returned as a decimal, but the GUI displays it in hexadecimal format.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:ELMentid?
SCPI Example
Couplings
Preset	42
State Saved	Yes
Min
Max

Length

The value of this setting is in decimal format, while the GUI displays it in hexadecimal.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:LENGth?
SCPI Example
Couplings
Preset	1
State Saved	Yes
Min
Max

Non-ERP Present

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:NEPR:PRESent[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:NEPR:PRESent[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Use Protection

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:USE:PROTection[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:USE:PROTection[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Barker Preamble Mode

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:BPMode[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:ERP:BPMode[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

HT Capabilities

Click the > button displayed with this setting to open the HT Capabilities window where you can configure HT capabilities parameters. An HT STA declares that it is an HT STA by transmitting the HT Capabilities element. The HT Capabilities element contains a number of fields that are used to advertise optional HT capabilities of an HT STA.
Its element ID is 45, and its length is 28 octets.

Enabled

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:ENABled[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:ENABled[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Element ID

The value of this setting is in decimal format, while the GUI displays it in hexadecimal. For example, a default value of 45 is shown as 0x2D in the GUI.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:EID?
SCPI Example
Couplings
Preset	45
State Saved	Yes

Length

The value of this setting is in decimal format, while the GUI displays it in hexadecimal.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:LENGth?
SCPI Example
Couplings
Preset	26
State Saved	Yes

B0: LDPC Coding Capability

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:LDPC:CODing[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:LDPC:CODing[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B1: Supported Channel Width Set

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:CWDidth[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:CWDidth[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B2: SM Power Save B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:SMPSave:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:SMPSave:B0[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B3: SM Power Save B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:SMPSave:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:SMPSave:B1[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B4: HT Green Field

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:GREen[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:GREen[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B5: Short GI for 20 MHz

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:SGI:CBW20[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:SGI:CBW20[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B6: Short GI for 40 MHz

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:SGI:CBW40[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:SGI:CBW40[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B7: Tx STBC

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:TX:STBC[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:TX:STBC[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B8: Rx STBC B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:RX:STBC:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:RX:STBC:B0[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B9: Rx STBC B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:RX:STBC:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:RX:STBC:B1[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B10: HT-Delayed Block Ack

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:DBACk[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:DBACk[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B11: Maximum AMSDU Length

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:AMSDu:MAX[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:AMSDu:MAX[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B12: DSSS/CCK Mode in 40 MHz

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:DSSS:CCK[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:DSSS:CCK[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B13: Reserved

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:REServed[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:REServed[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B14: Forty MHz Intolerant

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:INTolerant:CBW40[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:INTolerant:CBW40[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B15: L-SIGTXOP Protection Support

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:LSIG:TXOP:PSUPport[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:LSIG:TXOP:PSUPport[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

AMPDU Parameters

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:AMPDu [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:AMPDu?
SCPI Example
Couplings
Preset	00
State Saved	Yes

Supported MCS Set

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:MCS [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:MCS?
SCPI Example
Couplings
Preset	00000000000000000000000000000000
State Saved	Yes

HT Extended Capabilities

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:EXTended [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:EXTended?
SCPI Example
Couplings
Preset	0000
State Saved	Yes

Transmit Beamforming Capabilities

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:TBEamforming [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:TBEamforming?
SCPI Example
Couplings
Preset	00000000
State Saved	Yes

ASEL Capabilities

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:ASEL [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:CAPability:ASEL?
SCPI Example
Couplings
Preset	00
State Saved	Yes

HT Operation

Click the > button displayed with this setting to open the HT Operation dialog where you can configure HT operation parameters. The HT Capabilities element controls the operation of HT STAs in the BSS.

Its element ID is 61, and its length is 24 octets.

Enabled

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:ENABled[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:ENABled[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Element ID

The value of this setting is in decimal format, while the GUI displays it in hexadecimal.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:EID?
SCPI Example
Couplings
Preset	61
State Saved	Yes

Length

The value of this setting is in decimal format, while the GUI displays it in hexadecimal.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:LENGth?
SCPI Example
Couplings
Preset	22
State Saved	Yes

Primary Channel

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:PRIMary:CHANnel [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:PRIMary:CHANnel?
SCPI Example
Couplings
Preset	00
State Saved	Yes

Ht Operation Info

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:INFO [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:INFO?
SCPI Example
Couplings
Preset	0000000000
State Saved	Yes

Basic MCS Set

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:BASic:MCS [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:HT:OPERation:BASic:MCS?
SCPI Example
Couplings
Preset	00000000000000000000000000000000
State Saved	Yes

VHT Capabilities

Click the > button displayed with this setting to open the VHT Capabilities dialog where you can configure VHT capability parameters. A VHT STA declares that it is a VHT STA by transmitting the VHT Capabilities element. The VHT Capabilities element contains a number of fields that are used to advertise optional VHT capabilities of an VHT STA.

Its element ID is 191, and its length is 14 octets.

Enabled

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:ENABled[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:ENABled[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Element ID

The value of this setting is in decimal format, while the GUI displays it in hexadecimal.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:EID?
SCPI Example
Couplings
Preset	191
State Saved	Yes

Length

The value of this setting is in decimal format, while the GUI displays it in hexadecimal.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:LENGth?
SCPI Example
Couplings
Preset	12
State Saved	Yes

B0: Maximum MPDU Length B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MPDU:MAX:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MPDU:MAX:B0[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B1: Maximum MPDU Length B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPabilitiy:MPDU:MAX:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MPDU:MAX:B1[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B2: Supported Channel Width Set B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:CWIDth:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:CWIDth:B0[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B3: Supported Channel Width Set B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:CWIDth:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:CWIDth:B1[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B4: Rx LDPC

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:LDPC[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:LDPC[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B5: Short GI for 80 MHz

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SGI:CBW80[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SGI:CBW80[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B6: Short GI for 160 MHz

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SGI:CBW160[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SGI:CBW160[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B7: Tx STBC

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:TX:STBC[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:TX:STBC[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B8: Rx STBC B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:STBC:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:STBC:B0[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B9: Rx STBC B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:STBC:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:STBC:B1[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B10: Rx STBC B2

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:STBC:B2[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:STBC:B2[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B11: SU Beamformer Capable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SU:BFER[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SU:BFER[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B12: SU Beamformee Capable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SU:BFEE[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SU:BFEE[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B13: Beamformee STS Capability B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:STS:BFEE:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:STS:BFEE:B0[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B14: Beamformee STS Capability B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:STS:BFEE:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:STS:BFEE:B1[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B15: Beamformee STS Capability B2

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:STS:BFEE:B2[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:STS:BFEE:B2[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B16: Number Of Sounding Dimensions B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SDIMension:COUNt:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SDIMension:COUNt:B0[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B17: Number Of Sounding Dimensions B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SDIMension:COUNt:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SDIMension:COUNt:B1[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B18: Number Of Sounding Dimensions B2

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SDIMension:COUNt:B2[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:SDIMension:COUNt:B2[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B19: MU Beamformer Capable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MU:BFER[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MU:BFER[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B20: MU Beamformee Capable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MU:BFEE[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MU:BFEE[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B21: VHT TXOP PS

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:TXOP:PS[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:TXOP:PS[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B22: HTC-VHT Capable

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:HTC:VHT[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:HTC:VHT[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B23: Maximum AMPDU Length Exponent B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:AMPDu:MAX:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:AMPDu:MAX:B0[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B24: Maximum AMPDU Length Exponent B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:AMPDu:MAX:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:AMPDu:MAX:B1[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B25: Maximum AMPDU Length Exponent B2

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:AMPDu:MAX:B2[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:AMPDu:MAX:B2[:STATe]?
SCPI Example
Couplings
Preset	ON
State Saved	Yes

B26: VHT Link Adaptation Capable B0

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:LINK:ADAPtation:B0[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:LINK:ADAPtation:B0[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B27: VHT Link Adaptation Capable B1

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:LINK:ADAPtation:B1[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:LINK:ADAPtation:B1[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B28: Rx Antenna Pattern Consistency

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:APConsistency[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:RX:APConsistency[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

B29: Tx Antenna Pattern Consistency

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:TX:APConsistency[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:TX:APConsistency[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Supported MCS Set Field

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MCS [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:CAPability:MCS?
SCPI Example
Couplings
Preset	0000000000000000
State Saved	Yes

VHT Operation

Click the > button displayed with this setting to open the VHT Operation dialog where you can configure VHT operation parameters. The VHT Capabilities element controls the operation of VHT STAs in the BSS. Its element ID is 192, and its length is 7 octets.

Enabled

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:OPERation:ENABled[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:OPERation:ENABled[:STATe]?
SCPI Example
Couplings
Preset	OFF
State Saved	Yes

Element ID

The value of this setting is in decimal format, while the GUI displays it in hexadecimal.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:OPERation:EID?
SCPI Example
Couplings
Preset	192
State Saved	Yes

Length

The value of this setting is in decimal format, while the GUI displays it in hexadecimal.

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:OPERation:LENGth?
SCPI Example
Couplings
Preset	5
State Saved	Yes

VHT Operation Information

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:OPERation:INFO [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:OPERation:INFO?
SCPI Example
Couplings
Preset	000000
State Saved	Yes

Basic MCS Set

SCPI Command	[:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:OPERation:BASic:MCS [:SOURce]:RADio:WLAN:WAVeform:AC:NHT:BEACon:VHT:OPERation:BASic:MCS?
SCPI Example
Couplings
Preset	0000
State Saved	Yes